Aimless Wanderin’ at the Meso-Scale (Part 2)

Dr. Stuart Wright, Senior Scientist, EDAX

If my memory is functioning correctly, I believe Val Randle coined the term “meso-texture” to describe the texture associated with the misorientations at grain boundaries.

I confess that, whenever I hear the term, I chuckle. This is because of a humorous memory tied to the first paper I was involved with. I was an undergraduate at Brigham Young University (BYU) at the time. The lead author, Brent Adams, later became my PhD advisor. The ideas presented in this work became the motivation behind my PhD work to automate EBSD.

B. L. Adams, P. R. Morris, T. T. Wang, K. S. Willden and S. I. Wright (1987). “Description of orientation coherence in polycrystalline materials.” Acta Metallurgica 35: 2935-2946.

The paper describes some impressive work on the mathematical side by Brent and Peter and painstaking work by Tong-Tsung Wang who did hundreds of manual orientation measurements from individual grains in several planar sections of aluminum tubing using selected area diffraction. My role was digitize the microstructures in such a way that the two-point orientation correlations could be computed. The following is an example of one section plane from this work.

Digitized microstructure of one half of one section of a total of 10 sections used in the calculation of the orientation coherence function for aluminum tubing. Each grain number represents a individual grain orientation measurement.

The experimental work was a major undertaking. Thus, Brent Adams was so interested to hear David Dingley’s talk on EBSD at ICOTOM 8 in Santa Fe in 1987 shortly after this paper was published. Brent envisioned a fully automated system to link crystallographic orientation with microstructure via EBSD.

One of the interesting findings of this work was the discovery of a Meso-Structure:

“The strong implication of Table 2 is that there exists a new scale of microstructure in the material (and presumably in other polycrystalline materials) which has not previously been characterized, or even observed except in a qualitative manner. It seems appropriate to identify this new scale of microstructure as mesostructured since it clearly pertains to clusters or aggregates of grains or crystallites”

Greek statue who seems to be suppressing a chuckle.

After this paper was published Brent received a letter from Sir Charles Frank. Sir Charles expressed his interest and appreciation for the ideas presented in the work. However, he objected to the term Meso-Structure. One of his objections was that “Meso” has its roots in Greek, but “Structure” is Latin. He didn’t like that we were mixing words of different etymological origins. I have to think this criticism was given “tongue in cheek” as the term microstructure with which Sir Charles was well familiar also mixes Greek and Latin. Thus, whenever I hear the term mesotexture used to describe grain boundary or misorientation texture I have to chuckle given it’s mix of the Greek “meso” and Latin “texture”.

I’m not sure what the best term is to describe the preferred misorientation of grain boundaries. The community uses the terms misorientation, disorientation, orientation difference and others sometimes as synonyms and at other times with differences in meaning. As all aimless wanderin’s tend to leave crisscrossing tracks, I note that my first exposure to the use of Rodrigues Vectors, which lend themselves well to describing misorientation, was by Sir Charles Frank at ICOTOM 8 in Santa Fe.

I hope my aimless wanderin’s through odd terminology and anecdotal history doesn’t leave you too disoriented 😊

(Next in this series are some ruminations on the term “3D texture”).

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s