Dr. Bruce Scruggs, XRF Product Manager, EDAX
This year is shaping up to be an interesting year for travel. Five countries and counting, and I’m not even including a stopover in Texas. The last trip was to Brazil. Beautiful country. But, there’s a reason you see snack and beverage vendors roaming the side of the highways in Rio and Sao Paulo..…
I started out with a micro-XRF workshop at the Center for Mineral Technology at the Federal University at Rio de Janeiro. We were working out of the Gemological Research Laboratory with Dr. Jurgen Schnellrath. At the end of the technical presentations, we analyzed some various pieces of jewelry that participants from the workshop brought. I must admit that this makes me a bit nervous to analyze anything with unforeseen sentimental value and I refuse to analyze engagement and wedding rings. A large pair of blue sapphire earrings turned out to be glass. (Purchased at a garage sale at a garage sale price. So, no big surprise …) Another smaller set of blue sapphire earrings were found to be natural sapphires accompanied by a sigh of relief from the owner. (They came from a reputable jewelry shop with a reputable jewelry shop price.)
|Gold leaf||“Gold leaf'” embedded in resin|
At the end, we analyzed what was termed “gold leaf” jewelry, i.e. a ring and a pair of earrings. The style of these pieces was thin gold leaf foil embedded in resin. The owner was one of the younger students in the lab and she had purchased the jewelry herself from a relatively well-known designer’s collection. The goal was to measure for the presence of gold. Since the gold leaf was embedded in resin, XRF was the ideal tool to measure the pieces non-destructively. The jewelry also had some rather odd topography at times given the surrounding resin, but the Orbis had no problem to target the gold leaf given the co-axial geometry of the exciting X-ray and video imaging. I would have liked to have used the excuse that we couldn’t target the sample accurately because of XRF system geometry. There was no gold. Copper / Zinc alloy. That was it. She had paid about $30 US for the earrings and she said she felt cheated. I kept thinking “Cheated? Maybe … live a little, wait until you buy a house!” Later, I was searching the internet looking for a technical definition for “gold leaf”. I knew I was onto something when I found a webpage that said that gold leaf was “traditionally” 22K gold thin foil used for gilding. The page later described modern Copper/Zinc alloy metal leaf “… offering the same rich look of gold leaf, but at a fraction of the price….” Apparently, this metal leaf can be found at art stores. Who knew?
From there, we went on to the state of Sao Paulo and did a workshop at the Center for Nuclear Energy in Agriculture at the University of Sao Paulo. During the workshop, some of the students gave presentations on their work. I saw a very interesting experimental setup with live plants being measured in the Orbis. The plant’s roots were placed in a water bath doped with various forms of minerals or fertilizers. The whole plant, roots, stem, leaves, was then inserted into the Orbis and the stem was measured to monitor the uptake time for the relevant components in the bath. The plants could be moved in and out of the chamber to monitor the uptake over extended periods of time and over various portions of the plant.
On the way to the Sao Paulo airport, I had the pleasure of sitting in the longest traffic jam I have ever endured with the monotony being broken by roaming snack and beverage vendors. It was quite the sight to watch the peanut vendors carrying propane fueled peanut warmers traversing the lane dividers on the highway with the occasional motorcycle speeding between the cars along the same lane dividers.
Tip for next time … buy the Brazilian produced chocolate before going to the airport. The selection at the airport is rather limited and you never know when you may be having more fun than humans should be allowed to have watching motorcycles and peanut hawkers.